EC-171 Robotic Palletizing Machine

    Features

  • The EC-171 robot has the largest working envelope of all Fuji Robots while maintaining the smallest rotation radius. The EC-171 is energy efficient using only 4 Kva while still allowing the robot to work in tight space conditions and accomplish a high palletizing rate.

    This robotic palletizing machine, as well as the other models, offer many advantages that no other manufacturer can provide. Please note a few of those advantages and contact us directly to find out more. Click here to see the EC-171 Robotic Palletizer Video.

    EC-171 robotic palletizing machine and other robot projects from American-Newlong.
    American-Newlong can manufacture multiple robot projects
    at the same time as shown in this photo.

    Mechanical Advantage

    The weight of the mechanically balanced arm can be supported by a single finger. This insightful fact demonstrates the dynamics of a true palletizing robot. This unique design allows our robot to use less energy and dramatically reduces unwanted stress on the arm joints, bearings, pivot points, and floor supports. Other industrial robots were originally designed for painting, welding, tending machines, etc? A balanced boom was not a factor due to the nature of robot applications at the time. The Fuji Robot is the only manufactured articulated robotic arm “specifically” built for palletizing.

    Software / Human Interface Advantage

    The touch screen (standard with every model) is geared for machine operators, mechanical personnel, and management alike. The operators can change a palletizing program in less than 5 seconds. Maintenance personnel can add lubrication based on an onboard warning system, review error occurrences and take corrective measures based on the problem, and monitor I/O in real time. Management can track palletized inventory by specific programs (60 recipe locations), compare running hours with powered up hours, and have the ability to monitor the machine in real time from their office (Ethernet ready PLC and networking software required).

    EC-171 Specifications
    Type of Motion Multi-Articulated
    Action Mode Cylindrical
    Load Capacity (including end effector) 160 kg (353 lbs.)
    Palletizing Capacity (cycles / hour) 1,600
    Degree of Freedom 4 Axis
    Operating Area Z axis (vertical) 2400 mm ( 94.75")
    R axis (longitudinal) 1600 mm (63")
    Theta axis (rotation) 330°
    Alpha axis (wrist) 330°
    Memory 120 Blocks (20 layers x 30 steps)
    Teaching Method Teaching Playback/Teaching Support
    Power Requirements 208-220 VAC, 3 Phase, 50/60 Hz
    Power Consumption (without peripheral equipment load) 4.0 Kva/10.5 Amps
    Robot Weight (without end effector) 750 kg (1654 lbs.)
    Pneumatics (air source) 0.5 Mpa
    Pneumatic Consumption (*using standard Fuji case or bag end effector) Maximum Air Pressure - 120 psi (0.827 Mpa)
    Fuji Robotics End Effectors require *5.7 SCFM @ 73 psi (.5 Mpa)
    NOTE: Specifications are subject to change without notice. Capabilities as stated above are the maximum that may be achieved by the robot under ideal conditions. Capacity rates can be significantly affected by layouts, product types and total payload weight. Accurate capacity can be confirmed after a detailed analysis of an application. *Pnuematic consumption may vary with use of a third party end effector.

    Options

  • Cold environment upgrade
  • Harsh environment upgrade (stainless steel components)
  • Memory program expansion
  • Auto reject function
  • Simultaneous multi-size product handling (5th axis)
  • Slipsheet placement
  • Pallet placement
  • Click here to view the Fuji Robotics Series Automatic Palletizing Equipment literature
  • Robot Specification Form
  • Our Line of Robotic Palletizing Machines

    EC-102 Robotic Palletizer
    EC-102 Series

    EC-171 Robotic Palletizer
    EC-171 Series

    EC-201 Automatic Palletizer
    EC-201 Series

© Copyright 2018 American-Newlong, Inc.

Material displayed is not to be used without permission of the owner.